FILL - DEBURRING WHEEL

DEBURRING WHEEL - for pre-deburring and deburring of castings - Burrs on castings made of grey cast iron etc. or other protrusions are simply knocked off by means of rotating, specially developed impact knives.

Source: FILL

The individual mounted impact blades are made of very resistant powder-metallurgical tool steel and guarantee maximum service life. The castings are brought to the rotating knock-off wheel by means of a robot or a manipulator. Depending on the design of the gripper, all sides of the casting can thus be freed from burrs, sprues, pins, etc. A robot-guided deburring wheel can also be implemented. Pre-deburring of the components also increases the service life of the possible subsequent grinding process, as the result is a constantly constant residual burr height. Depending on the thickness of the burrs, the deburring wheel can also take over complete deburring and replace the grinding process step.

 

Source: FILL

 

ADVANTAGES

  • High flexibility
  • Deburring of castings "in the black"
  • Long service lives
  • Low tool costs
  • Burrs up to 100 mm in height can be removed.
  • Low investment costs

Source: FILL

Back