Source: aagm.de

The whirl mixer consists of a vertically divided trough in tube design with easily replaceable internal wearing shells, a mixer shaft with mixing paddles, and the binder dosing system. In order to clean them, the trough shells can be opened sideways, and the mixer shaft revealed completely. The internal wearing shells cover the entire length of the mixing trough so that the machine is protected against wear of the basic housing in the entire mixing area. The individual adjustable and replaceable mixing paddles protected against twisting in a form-fit manner are armed with tungsten carbides. Their distance to the internal wearing shells and their angle to the shaft axis can be adjusted. 

In addition, a flood station with fully automatic coating preparation and viscosity adjustment was also installed and put into operation. The scope of delivery also included the indirectly heated automatic feed of the coating and the thinner, a flood tank / plunge pool, coating pump with pre-filter and pulsation damper as well as the complete electrical control and visualization

Source: aagm.de